Shipping Options

View more details in our Shipping Policy

All shipping rate advertisements assume delivery to continental US address, and that the part is in stock and is not oversized.

Shipping rates are per order, not per part!

Standard – $10.99
Estimated arrival
Wednesday May 1–May 6
Quicker – $24.99
Estimated arrival
Wednesday May 1
Quickest – $33.99
Estimated arrival
Tuesday Apr 30

Category Archives: Refrigerator

WR51X10101 – How To Wire and Install New Style Double Heater

Posted on July 15, 2011

GE’s WR51X10101 Defrost heater has been used for many years on many models of refrigerators.  GE used to use a single glass tube heater, and in 2007 they redesigned the defrost heater to a dual tube design that fits in the same location.  The new design spreads the wattage of the heater out over two glass tubes instead of one to reduce the number of heater failures.

*Before working on your refrigerator, make sure to unplug it.

What you’ll notice first on the new heater is that there is a yellow jumper wire on the left hand side.  Do not remove this jumper, hooking up the heater to only one of the heater tubes will cause it to burn out as soon as the refrigerator goes through a defrost cycle.  What you will need to do is remove the wire that used to go to the left side of the old heater (usually the blue wire) and run it over to the right side of the refrigerator. Both the blue and pink wire will be hooked up on the right side of the new heater.  See the above picture for reference.  In some cases, if the blue wire is not long enough to reach to the other side, it will need to be extended.  Included with the new heater is an extension wire and crimp connector to extend the wire.  The new heater should fit in the same place that the old heater went, it can be a tight fit but it will work.

If you need to purchase a defrost heater for your GE or Hotpoint refrigerator, see the link below.  If you have any questions, please post them in the comments below.

GE Defrost Heater Assembly – WR51X10101

Whirlpool Appliance Age – Serial Number Decoder

Posted on July 2, 2011

In order to find the age of a Whirlpool built appliance you will need the serial number from the appliance.  Since Whirlpool manufactures appliances under many different names, this may work with some of these brand names also:

Whirlpool, Kenmore (Sears), Maytag (Newer models), Kitchen Aid, Estate, Inglis, Roper, Amana, Jenn Air, Crosley and more.

Please do not contact our company for assistance trying to determine the age of your appliance as we will be unable to help.  If the information on this page does not answer your question please contact the manufacture directly for futher assistance.

Serial Number Example:

CR3949348

1st Digit: Where the appliance was manufactured. C = Clyde, OH.

2nd Digit: Year Manufactured.  R = 2004

3rd & 4th Digit: Week the appliance was manufactured.  39 = 39th week of the year.

5th-9th Digit: Manufacture order that week

See the charts below for the year codes:

Whirlpool Model Number Codes
A letter in the model number indicates the year the model was introduced. Please note that the year the model was introduced to NOT indicate the production date. For models 1981 and older you will reference the 2nd character in the model number, and on models produced after 1981 you will reference the 8th character in the model number. Please reference the charts below for the year codes:

Parts Dr

Our customers matter a lot to us! So we provide YOU with as much information on repairing your appliance as possible. And its all FREE!

Categories

Locate Model Number

Choose your appliance type