Part
Dispenser Cover Assembly
Product Rating
Customer
Edward from AL
Problem
The ice and water through the door actuator paddle broke.
Tools
Philips screw drive and a putty knife.
Repair & Advice
I removed the old part and roses it with the new. It took less than 5 minutes.
Story submitted on April 3, 2021
Part
Dispenser Cover Assembly
Product Rating
Customer
John from FL
Problem
Could not erase error codes….
Tools
Phillips screw driver, very thin putty knife.
Repair & Advice
I tried to remove the part as explained in the instructions, but the part would not come off easily. I used the putty knife along the top edge where the clips are to separate it from the fridge. Only then I could pull it out using thumbs and hand. It took me longer than it should have trying to remove it without the knife. Installing the new part was a breeze by following the video instructions.
Story submitted on June 30, 2021
Part
Dispenser Cover Assembly
Product Rating
Customer
Maurice from NV
Problem
Icemaker lever broken.
Tools
Flat head screwdriver, putty knife, hammer.
Repair & Advice
I have a Samsung refrigerator from 2014, the lever on the icemaker is not made anymore, I thought I would buy the dispenser assembly and lever, but I found a deal on the whole unit including the control panel, When I put it in, it would not set up so I took the dispenser assembly and lever and installed that on my old control panel and now everything is working right, maybe the new control panel did like my circuit board, But everything is good now.
Story submitted on June 9, 2021