Part
Dispenser Lever Assembly
Product Rating
Customer
Clyde from NM
Problem
Ice dispenser broke
Tools
Wide flat head screw driver, phillips screw driver, Q-Tip, calcium cleaner or such product
Repair & Advice
Be careful removing the front control panel so you don't dent and chip the paint on the door. this is the hardest part. use the widest blade flat head screw driver and pry down on the top and you can pop it out. It's stiff plastic, i started in the middle and worked it back and forth while pulling down on the panel. It will pop out so keep a good grip on it. I dropped mine. It did not break. the rest is easy. remove the four phillips screws and disconnect the two electrical connectors. take it easy removing the water supply tube, don't kink it and clean the end of the tube as there will be mineral deposits in and around it. reinstall is the reverse of taking the part out. takes about 20 min. don't be in a hurry. the new part works great, it's like night and day! well worth the money.
Story submitted on March 31, 2016