Part
Dispenser Frame Module
Product Rating
Customer
Chris from PA
Problem
Ice dispenser flap would not close
Tools
Putty knife and Phillips head screwdriver
Repair & Advice
I couldn’t find a YouTube video for my exact model. The difference in my experience from the YouTube videos I could find is that the screws I needed to access were behind a plastic cover plate on my refrigerator. I used the putty knife to pry that plastic cover plate off. From then on it was pretty straightforward. I just removed I think six Phillips head sheet metal screws. Then I removed the water supply hose. Then I was able to remove the entire part. I did have to unplug a few wire harnesses. And then I installed the new part. When the part was installed I reinstalled the cover plate.Then I turned back on the electric breaker for the refrigerator. And everything worked fine.
Story submitted on November 23, 2019
Part
Dispenser Frame Module
Product Rating
Customer
Adam from NY
Problem
Ice dispenser would open, but the auger (the spiral thing in the ice tray) wouldn't advance the ice. This fixed the issue.
Tools
Putty knife trip remove the fascia and screw driver.
Repair & Advice
It's so satisfying to fix something this easily! Calling a repair man probably would have cost the same as a new fridge!
Story submitted on May 4, 2021
Part
Dispenser Frame Module
Product Rating
Customer
Jerry from LA
Problem
Water dispenser was staying stuck while trying to get water.
Tools
Phillips screwdriver.
Repair & Advice
Less than 15 minutes to remove dispenser module and replace. Parts arrived timely and well packaged.
Story submitted on October 12, 2021