Dispenser Frame Module

Dispenser Frame Module

Chris from PA

Ice dispenser flap would not close

Putty knife and Phillips head screwdriver

I couldn’t find a YouTube video for my exact model. The difference in my experience from the YouTube videos I could find is that the screws I needed to access were behind a plastic cover plate on my refrigerator. I used the putty knife to pry that plastic cover plate off. From then on it was pretty straightforward. I just removed I think six Phillips head sheet metal screws. Then I removed the water supply hose. Then I was able to remove the entire part. I did have to unplug a few wire harnesses. And then I installed the new part. When the part was installed I reinstalled the cover plate.Then I turned back on the electric breaker for the refrigerator. And everything worked fine.

Dispenser Frame Module

Adam from NY

Ice dispenser would open, but the auger (the spiral thing in the ice tray) wouldn't advance the ice. This fixed the issue.

Putty knife trip remove the fascia and screw driver.

It's so satisfying to fix something this easily! Calling a repair man probably would have cost the same as a new fridge!

Dispenser Frame Module

Jerry from LA

Water dispenser was staying stuck while trying to get water.

Phillips screwdriver.

Less than 15 minutes to remove dispenser module and replace. Parts arrived timely and well packaged.