Part
9" Dual Radiant Element
Product Rating
Customer
CYRIL from GA
Problem
My GE dual element stopped working and I had to replace it.
Tools
Wrench
Repair & Advice
It took me a short time to replace and it was not complicated.
Story submitted on August 10, 2018
Part
9" Dual Radiant Element
Product Rating
Customer
Delbert from NY
Problem
Burner would not light
Tools
Small socket and screwdriver
Repair & Advice
Simple process, turn off the power, remove the two screws holding the glass burner area to the top of the stove (located under the front lip above the oven door), lift up the glass top cooking area, prop it up with a piece of wood, take a picture of the wires to ensure you put them back as needed and disconnect them, remove the two spring clips to remove the broken burner, using the new burner, repeat the above process in reverse to install the new burner. Turn on the power and test.
Story submitted on June 19, 2018
Part
9" Dual Radiant Element
Product Rating
Customer
Andrew from WA
Problem
No heat on the 9" dual element
Tools
Long nose pliers, small flat head screw driver.
Repair & Advice
Part is exactly like the GE original one, just swap the good part in, re connect the spring hooks and re connect the wiring. Be sure to take a photo showing where all the wiring go before disconnect the old element.
Story submitted on November 29, 2017