Part
Drain Pump Assembly
Product Rating
Customer
Charles from OH
Problem
Washer was stuck in drain mode.
Tools
5/16 nut driver, pair of channelocks.
Repair & Advice
Thought board was bad. Ordered new board and did the same thing. No lights was coming on on board. Took drain hose off to see if there was a clog and there wasn't. Took drain motor off washer and found broken impeller. Replaced assembly and it worked fine.
Story submitted on November 30, 2019
Part
Drain Pump Assembly
Product Rating
Customer
george from TX
Problem
Washer will not drain
Tools
Screwdriver and pliers
Repair & Advice
Every easy to fix
Story submitted on January 23, 2019
Part
Drain Pump Assembly
Product Rating
Customer
Mike from MA
Problem
Washer stopped mid-cycle, would not drain. Had trouble going into diagnostic mode until I unplugged the pressure switch tube from the back of the control board, once in diagnostics I did manual test and found the drain pump was dead.
Tools
5/16 socket, slip joint pliers
Repair & Advice
Hardest part of the job was vacuuming out the water from the tub and cleaning up the spill after laying the machine down
Story submitted on March 19, 2024