Part
Detergent & Rinse Aid Dispenser
Product Rating
Customer
Michael from CO
Problem
Soap dispenser door would not latch anymore.
Tools
Drill with a Phillips head bit and nut driver
Repair & Advice
Very simple. Videos online showed how to do it. Took about 10 minutes. Be careful when removing the electrical connector for the soap door release.
Story submitted on October 6, 2019
Part
Detergent & Rinse Aid Dispenser
Product Rating
Customer
TONY from ME
Problem
Soap dispenser door not opening on its own
Tools
Screwdriver
Repair & Advice
Very easy to replace the part.
Story submitted on November 12, 2018
Part
Detergent & Rinse Aid Dispenser
Product Rating
Customer
Kenneth from NY
Problem
Broken plastic edge of the small detergent door that prevented it from closing.
Tools
Screwdriver small sockets needle nose plyers.
Repair & Advice
The old unit came out very easily as per the Video provided and installing was just as easy. Just make sure that you tighten all the small nut drive screws when reinstall the inside housing trim. I didn't and it leaked when I started the dishwasher but after I realized the nut drive screws were loose and I tightened them down the leaking problem was solved. It was just an additional step I could have saved. Otherwise a perfect fit.
The Video was a great help!
Story submitted on June 11, 2020