User Interface Control Board

User Interface Control Board

Enrique from TX

No response from interface control board

Phillips screw driver

The power on indicator led would not power on, no lights, no noise of any kind when power on button was depressed. Power on button in the past would work on and of, this led me to believe the interface control board was at fault.

User Interface Control Board

Brian from FL

Our Samsung dryer started to sporadically not turn on. Sometimes it would, sometimes it wouldn't. Then one day it just stopped working. Watching some YouTube videos we figured out how to verify that power was getting to the User Interface Control Board to make sure it wasn't a problem with the Main Control Board. We confirmed that the ICB was indeed getting power, so we decided to replace it and see if that would fix our issue.

Screwdriver

The User Interface Control Board arrived in great condition. Before doing anything, make sure the dryer is unplugged. Removing the top control panel from the dryer was very simple - only two screws holding it on. Then we separated both halves of the the top panel to gain access to the User Interface Control Board. Unscrew a few screws and then the board is easily swapped out. Make sure that you align the flat part of the Selector Knob receptacle with the flat part of the interface on the Control Board. This was probably one of the easiest appliance repair I've ever done! Now the dryer starts up every time!