Part
Control Board
Product Rating
Customer
Chris from WA
Problem
Oven would not heat.
Tools
Philips screw driver.
Repair & Advice
Before I was able to determine it was the circuit board I verified heating elements were good. This left the board as the issue.
Story submitted on January 29, 2019
Part
Control Board
Product Rating
Customer
Eric from CT
Problem
Broiler would not turn on.
Tools
Screwdriver.
Repair & Advice
I established everything else connected with the broiler was working correctly so I knew the only thing left was the control board itself. Unfortunately the board is not parted out individually so you have to replace the entire thing but it is easy to do. The most difficult part is getting to some of the screws to need to remove the front panel. Otherwise pretty easy.
Story submitted on April 3, 2024
Part
Control Board
Product Rating
Customer
Corey from MI
Problem
Jenn Air Oven-no bake or broil
Tools
Multimeter, screwdrivers
Repair & Advice
No power to the bake or broil elements. No error codes shown. After checking continuity and resistance in the two elements and the temp sensor, determined it was a bad control board. New control board fixed the issue.
Story submitted on January 26, 2024
Chat with us
Open today 9am-6pm CT
0
