Part
Heating Element Assembly
Product Rating
Customer
Frank from TN
Problem
Dryer would not heat up.
Tools
Phillips screwdriver and Phillips bit with a ratchet wrench.
Repair & Advice
This job is pretty straight forward pop the top with a flat blade screwdriver remove 2 screws on top and 2 screws inside the door and unplug door light to remove front panel lift up move out of way heat element unit is bottom right remove 2 screws on canister (hard to see but they are there) remove 2 screws at pedestal base remove base push up and pull toward you remove wires note locations pull canister out do the reverse of the process to reassemble.
Story submitted on June 30, 2020
Part
Heating Element Assembly
Product Rating
Customer
Jeff from CO
Problem
Dryer wouldn't heat.
Tools
Phillip's screw driver.
Repair & Advice
Great videos on YouTube for this repair.
Story submitted on November 11, 2020
Part
Heating Element Assembly
Product Rating
Customer
Daniel from MA
Problem
Dryer would not get warm.
Tools
Screwdriver.
Repair & Advice
Dryer would not get hot. Took apart dryer found heating element and removed it . Order part and replaced. Works great!
Story submitted on January 27, 2021