Part
Spark Ignitor Switch & Harness
Product Rating
Customer
Robert from CA
Problem
One burner not lighting.
Tools
Flat head and Phillips screwdrivers, hex drivers.
Repair & Advice
For me the most difficult part of this job was getting the top of the stove open. Online information showed ways of opening it that didn’t apply to this model. I eventually unscrewed some screws at the control panel area and unbolted the top surface. This gave me the access i needed. Beyond this complication, the repair was very straightforward.
Story submitted on December 18, 2020
Part
Spark Ignitor Switch & Harness
Product Rating
Customer
Joe from PA
Problem
Gas range would not spark on right side of range
Tools
2 nut drivers and screw gun
Repair & Advice
10 to 15 min. to take range apart another 10 to 15 to install new part had to take back panel off range.Biggest problem for me was getting the 4 screws in front of range to lineup I’m 70 yr.old need new glasses or to be 20yr. younger still repair was fairly easy now help me get off the floor
Story submitted on March 12, 2022