Door Bottom Trim Piece

Door Bottom Trim Piece

Joe from CA

Corrosion and rust on door bottom trim piece.

Screwdriver, hammer, liquid wrench, blue tape, steel wool, wire brush.

Used liquid wrench on screws because of the rust and corrosion. Took time to clean outer glass panel and inner glass panel and in areas otherwise not accessible. Cleaned old rust and corrosion very well to prevent spread. The appliance looked new with the exception of the trim piece. The design catches water/spillage very easily, so we will be more careful to keep it dry and clean in the future. I rated it as easy, but it helps to have another set of hands when you are lining up the screws with the holes for re-installation. It took me about an hour, but I spent a lot of time cleaning.

Door Bottom Trim Piece

Jhovielyn from WA

Rusted bottom trim

Screwdriver

Watched YouTube on how to remove oven door in order to replace bottom trim. Easy DIY project.

Door Bottom Trim Piece

Cynthia from WI

The front door bottom trim piece on our stove was corroded.

Screwdriver

Ordered new trim piece that came fairly fast, but came bent. Live chat with company, filled out damaged report. Was sent a new piece in a fast timely manner.