Part
6" Radiant Surface Element
Product Rating
Customer
Phillip from GA
Problem
Stove burner burnt out
Tools
Screwdriver, pliers
Repair & Advice
Unplugged stove from wall, removed screws holding top in place by oven door. Propped open stovetop. Removed wire connections and clips holding burner in place. Installed new burner and reversed the procedure. Easy and quick.
Story submitted on December 22, 2015
Part
6" Radiant Surface Element
Product Rating
Customer
Ruth from IA
Problem
Burner on GE range no longer working
Tools
Screwdriver with hex driver head
Repair & Advice
Used the hex driver to unscrew hex screws to release the glass stove top and expose the burners. Once burners are exposed the electrical wires are then pulled away from the burner hook ups. Take the clips that hold the burner in place off and remove old burner. Then follow the same steps to replace old burner....very simple
Story submitted on September 6, 2017
Part
6" Radiant Surface Element
Product Rating
Customer
Randall from PA
Problem
Burner stopped working
Tools
1/4” nut driver voltage tester
Repair & Advice
Retired service technician
Story submitted on December 26, 2023