Part
Fan Board Sensor
Product Rating
Customer
Tyler from UT
Problem
Tried to run oven and would get F97 error as fan would turn on.
Tools
Screwdriver and socket wrench
Repair & Advice
It was pretty simple to replace after pulling out the double oven. The piece went to the fan on top of double oven (versus the fan in between the two ovens --->which is harder to get to). I hadn't taken apart an oven before but it was pretty simple after setting out my ammo boxes as a stand for the ovens - To get the oven back I jacked it up a couple inches with car jack and was able to slide it right in, making this a one-man job. Worked on it throughout the day as I had time. Easy to swap the part... challenge is getting oven out alone and all the screws to take the metal housing off. Easy, just takes time.
Story submitted on June 18, 2019
Part
Fan Board Sensor
Product Rating
Customer
John from FL
Problem
Oven would not work without the blower motor
Tools
T-8 bit, Phillips Screw driver and T-6 bit
Repair & Advice
Exact fit replacement for what I needed and works as good as the original did.
Story submitted on November 30, 2023
Part
Fan Board Sensor
Product Rating
Customer
Marc from CA
Problem
Oven had error code to replace fan
Tools
Drill to remove screws
Repair & Advice
I got an error code on my double oven and searched the problem on You Tube. Found needed parts on PartsDr and was able to replace fan assembly and sensor in a few hours and problem was fixed. Parts ordered were shipped super fast and were exactly what was needed. I highly recommend Parts Dr for any such repair needs
Story submitted on March 29, 2022