Part
Oven Control Board
Product Rating
Customer
Paul from IL
Problem
Stove top worked but oven controls and clock were not functioning.
Tools
Screwdriver
Repair & Advice
Simple replacement of the control board. The only thing that caught me off guard was the black decal had to be peeled off the old board and fortunately it still had enough adhesive to stick to the new board. Without the decal my touch panel and clock window would have been see through, exposing the control board to view through the window. Ordering the new decal might be an option to consider if your existing decal is torn or worn.
Story submitted on March 11, 2018
Part
Oven Control Board
Product Rating
Customer
William from MD
Problem
Oven control board malfunction
Tools
manual nut driver
Repair & Advice
removed all screws; took photo of bad driver; removed bad driver; reinserted wires according to picture taken; oven immediately operational
Story submitted on July 9, 2022
Part
Oven Control Board
Product Rating
Customer
jon from FL
Problem
The oven would heat up to the maximum temperature. The F2 error code was displayed.
Tools
Nut driver
Repair & Advice
I determined the problem was with the temperature sensor or the control board. Since the temperature sensor was the cheaper of the 2, I replaced it first.
As luck would have it the temperature sensor did not fix the problem. I replaced the control panel and the oven worked normally.
Please note you have to swap the decal over to the part. It is probably wiser to order a new decal if you order this part.
Story submitted on December 30, 2022