Part
Water Inlet Valve
Product Rating
Customer
jennifer from FL
Problem
Water would not enter the unit
Tools
Drill pliers and screw driver star bit driver
Repair & Advice
Remove the top by remove 3 1/4 inch bolts then using star bit driver to remove two screws inlet valve should become free then using pliers remove the hose clamps and then use a razor knife slice one side to ensure not to break the nipple off the soap dispenser.
Story submitted on August 31, 2015
Part
Water Inlet Valve
Product Rating
Customer
James from FL
Problem
Inlet valve would not close resulting in constant flow of hot water.
Tools
Screw driver and needlenosed pliers.
Repair & Advice
Simple...followed the PartDr's steps and had it back together and operational in less than 30 minutes.
Story submitted on April 4, 2017
Part
Water Inlet Valve
Product Rating
Customer
Dustin from MO
Problem
F8E1 error code Whirlpool Duet Front load Washer
Tools
Socket driver & pliers
Repair & Advice
F8E1 error code Whirlpool Duet Front load Washer.
Washer is not detecting any water flow going to the washer.
Replaced Inlet valves and now it runs great.
Story submitted on January 8, 2020