Pressure Switch

Pressure Switch

Amanda from FL

Water level knob broke off

Screw driver, pliers

This was the part we needed to fix the job. We are very pleased with the item and ease of purchase. Replacing was very easy. Thank you.

Pressure Switch

Greg from ME

Washing machine was not cycling properly ans the water would not turn off when the tub was full.

Phillips screwdriver and slotted screwdriver

Simply removed the 2 phillips screws behind the control panel, pulled forward lightly on the contro panel and lifted it off of the washer and tipped it over to access the pressure switch (the part behind the load size control). Unplug the wire harness connecting the control panel to the washer cabinet. Use the slotted screwdriver to remove the 2 spring clips, tilt the cabinet forward and remove. Unplu the clear plastic tube from the bottom of the tub. Return to the control panel and remove the load size control knob. Lift the small catch on the pressure switch and turnit to separate it from the control panel. Unplug the wire harness from the pressure switch and discard the bad switch. Reverse process to install new switch.