Part
Ice Maker Assembly
Product Rating
Customer
Craig from CO
Problem
Ice maker overflowing dripping water into the freezer.
Tools
Screwdriver, voltmeter, socket set, pliers.
Repair & Advice
The ice maker was overflowing causing ice buildup inside the freezer.
Two components were replaced...the solenoid valve was faulty. The valve was not closing fully after the maker called for water. Causing an overflow of water.
Ice tray motor failed along with the timer. The tray Teflon coating was peeling and causing the ice to stick to the tray. The motor failed so the ice was not harvested.
I replaced the valve and filter along with the entire ice maker assembly. Allow an hour for the door sensor to reset the harvest mode. The problem was fixed and is operating normally.
Story submitted on June 10, 2020
Part
Ice Maker Assembly
Product Rating
Customer
Marc from TX
Problem
Ice maker stopped working
Tools
Screwdriver/nut driver.
Repair & Advice
I replaced the broken ice maker with a new one. Replaced the entire ice maker rather than parts of it. The whole process was super easy as it was a matter of “plug and play”.
I was also impressed with the quick time from order to delivery (2 days).
Story submitted on February 18, 2022
Part
Ice Maker Assembly
Product Rating
Customer
THINH from CA
Problem
No ice
Tools
Screw driver
Repair & Advice
Ice cube frozen in the ice maker but did not churn it out.
Story submitted on November 1, 2022