Part
Handle Bracket
Product Rating
Customer
Andrew from MO
Problem
Soap draw handle was loose and I was worried it would eventually brake off while pulling the soap draw out.
Tools
You will need a T20 torx driver to take out the 2 screws, to get the old handle bracket off of the soap drawer.
Repair & Advice
The 2 lower snap tabs that hold the drawer to the front of the soap tray had broken off after about 13 years. You have to try to pry up and away on the drawer handle front cover to get the handle off of the soap tray because there are 3 big snap tabs and 3 locating tabs holding it on besides the 2 lower snap tabs.
Story submitted on April 21, 2020
Part
Handle Bracket
Product Rating
Customer
Yvonne from CA
Problem
Broken tabs on soap dispenser
Tools
Small flat screw driver
Repair & Advice
I had to release tabs on dispenser drawer, easier said than done. I released one with the screw driver no problem, but all the others were not easy to get to. I wish it had come with some kind of instructions on which tabs, and the best way to release them in order to get the part off. I did finally get it removed, then it was easy to attach the new part.
Story submitted on October 30, 2018