Part
Water Inlet Nozzle Assembly
Product Rating
Customer
Therman from AL
Problem
Water Inlet Nozzle hose was leaking.
Tools
Pliers and nut driver
Repair & Advice
During the process of a different repair to our top loading Maytag washer noticed a hose to the water inlet nozzle had a small hole and was leaking water. To replace the hose you have to order the complete water inlet nozzle assembly. To replace tape the lid down then lift the washer top panel. Water inlet nozzle assembly is located bottom center of the top washer panel. Use pliers to release hose clamps and disconnect hoses. Use nut driver to remove the single screw attaching the water inlet nozzle assembly to the top panel. Replace and attach new assembly then use pliers to reattach hoses.
Story submitted on April 1, 2023
Part
Water Inlet Nozzle Assembly
Product Rating
Customer
John from GA
Problem
Small Water leak under washer, found cracked hose
Tools
Plyers to squeeze clamp and phillips screw driver
Repair & Advice
Water leak from top of washer found cracked hose
Story submitted on September 16, 2021