Part
Ice Maker Tray
Product Rating
Customer
Micah from IL
Problem
The clip on the bottom of the ice tray that holds the thermistor in place broke off, resulting in water leaking from the ice machine.
Tools
Screwdriver (phillips and flathead)
Repair & Advice
The whole ice maker assembly must be removed. it is a little hard to get the tray off the turning mechanism so be careful not to bend or warp it. Google directions on how to remove the ice maker properly
Story submitted on February 21, 2016
Part
Ice Maker Tray
Product Rating
Customer
Pat from OH
Problem
Ice cube tray had a crack in it which caused water to go into bin and form huge block of ice
Tools
No tools necessary
Repair & Advice
Twist tray and slide to remove and reverse steps to install new tray.
Story submitted on December 6, 2016
Part
Ice Maker Tray
Product Rating
Customer
Kent from WI
Problem
Ice tray would not empty
Tools
Screwdriver
Repair & Advice
Removed sensor arm, took out old tray which had some mineral buildup causing it to not discharge the cubes, and replaced with the new tray. Replace sensor arm then you’re done. Note you have to twist the tray a bit to remove and replace.
Story submitted on August 17, 2022