Part
Water Level Control Switch
Product Rating
Customer
Gary from CA
Problem
Would not complete the wash cycle.
Tools
scew driver, 1/4 nut driver.
Repair & Advice
Remove the front kick panel. Carefully unplug the old switch and plug the wires into the new switch and let it hang. Carefully remove the old switch from the bottom of the float control valve by spreading the plastic on the sides to release the locating pins on the switch. Insert the new switch in the reverse of the removal and make sure the float moves freely.
Story submitted on January 27, 2020
Part
Water Level Control Switch
Product Rating
Customer
Gary from CA
Problem
Would not complete wash cycle
Tools
Screw driver and 1/4 nut driver
Repair & Advice
Remove the front kick panel. Carefully unplug the old switch and plug the wires into the new switch and let it hang. Carefully remove the old switch from the bottom of the float control valve by spreading the plastic on the sides to release the locating pins on the switch. Insert the new switch in the reverse of the removal and make sure the float moves freely.
Story submitted on January 27, 2020