Part
Orifice Holder & Ignitor (12.5K)
Product Rating
Customer
Corine from NJ
Problem
Igniters wouldn’t light.
Tools
Pliers, screwdrivers, etc.
Repair & Advice
My husband’s nephew installed all new orifice holders and igniters. Unfortunately he mixed up the front left igniter with the front right. The tubing on the right was very old and delicate so I had to order new tubing and a new orifice holder and igniter. We are still waiting on the tubing to come in so we can install our new part from the Parts Dr.
Story submitted on April 8, 2021
Part
Orifice Holder & Ignitor (12.5K)
Product Rating
Customer
Michael from ME
Problem
Burner assembly was coroded, mounting screw heads were broken and it was igniting properly. This part fixed it all. Mounting holes aren't threaded so I tapped them for screws I had on hand.
Tools
Wrenches, screwdrivers, tap and anti-seize.
Repair & Advice
Burner assembly was coroded, mounting screw heads were broken and it was igniting properly. This part fixed it all. Mounting holes aren't threaded so I tapped them for screws I had on hand. Be careful unthreading the the propane line from the burner. It's aluminum and may stick to the nut and twist. I unhooked the line from control valve and removed the whole assembly.
Story submitted on March 21, 2020