Part
Orifice Holder & Ignitor (9.2K)
Product Rating
Customer
Rafael from PA
Problem
Screws snapped off in old oriffice holder while trying to replace igniter switch.
Tools
Screw driver
Repair & Advice
Simple to replace. screw holes are not threaded in new part so I suggest running a self-tapping screw into holes before installing part.
Story submitted on March 23, 2016
Part
Orifice Holder & Ignitor (9.2K)
Product Rating
Customer
David from MI
Problem
Burner Ignitors would not light and screws were frozen into parts so all burners needed replacement
Tools
Phillips Screwdriver 7/16" Line Wrench
Repair & Advice
Parts arrived on time. Removed top of range. Need to disconnect all burners from top, 2 screws from under the front, and 2 by the knobs. Used 7/16" line wrench to remove burners and install new ones.
Story submitted on April 20, 2022