Part
Water Inlet Syphon
Product Rating
Customer
Kevin from WA
Problem
Water Inlet Siphon Broken
Tools
Pliers, flathead screwdriver, metal putty knife
Repair & Advice
Pop the clips that hold the control panel in place with putty knife, flip back and then remove the clips that hold the cabinet in place. Tip cabinet back and expose the water inlet siphon. Remove old siphon by first removing spring that holds water hose in place and disengage water hose. Then remove siphon by unclipping from washer back. Clip in new siphon and attach water hose and spring clip. Reassemble cabinet, spring clips and control panel. Voila - done. Make sure power and water is off before doing the above.
Story submitted on November 21, 2018
Part
Water Inlet Syphon
Product Rating
Customer
Robert from OH
Problem
Broke old one.
Tools
Pliers
Repair & Advice
Simple repair
Story submitted on November 3, 2017
Part
Water Inlet Syphon
Product Rating
Customer
Abigail from VT
Problem
Inlet sprayer was flapping in the drum every time I did a load of laundry.
Tools
Water Inlet Syphon, needlenose pliers, screwdrivers, wrench.
Repair & Advice
Followed a tutorial online after googling the part, very easy 2-person job!
Story submitted on January 5, 2021