Part
Overlay (White)
Product Rating
Customer
Christopher from WI
Problem
White on overlay pealed off when replacing the control board.
Tools
Screwdriver.
Repair & Advice
When switching an overlay be careful when removing off of old control board (A little heat may help to release the adhesive). Installing a new overlay is fairly simple. UNPLUG range. Remove upper back panel on Range. Unplug 2 connectors on the back of the control board. Remove 4 screws the hold control board in place. Place control board on a packing material or soft surface( to avoid damaging back side of board). Remove old overlay. Center and align new overlay on control board and allow to stick slightly. (working from the center) Press overlay onto control board. Reinstall in reverse order. Enjoy ;)
Story submitted on February 2, 2020