Part
Agitator Repair Kit
Product Rating
Customer
William from IN
Problem
Upper agitator would not really turn any more.
Tools
1/2 rachet with extensions and flat tip screw driver
Repair & Advice
My washer is a Kenmore made by whirlpool. I slid off the fabric softener dispenser. Under the dispenser there's a cover that you have to pry up with a flat tip screwdriver. Use a short one if you have one. Then using the 1/2 rachet and extensions take out the center nylon bolt. Make sure you have a couple 3 inch or 6 inch extensions it will make it easier. After that I cleaned everything and put the new parts together. Reassembled the parts the way they came out and tightened the nylon bolt. Put on the cover and the dispenser. Done.
Story submitted on January 23, 2021