Part
Motor Coupling
Product Rating
Customer
Nicholas from CT
Problem
Won't Spin or Agitate.
Tools
1/2" and 5/16th's Socket and Ratchet, Regular Screwdriver, Needle-Nosed Pliers.
Repair & Advice
Someone overloaded my 1993 Sears Kenmore Heavy Duty Top Loader Washer with too many clothes in my family. Stopped agitating and spinning. Found the Broken Motor Coupling laying under the machine when I disconnected the water lines and waste line. The new Motor Coupling went on easy even though it's a little tricky to line it up with the Electric Motor and Drive assembly when putting back together.
Story submitted on April 6, 2022
Part
Motor Coupling
Product Rating
Customer
Troy from IA
Problem
the tub would not spin
Tools
5/16' socket & rachet, pliers, screwdriver, light
Repair & Advice
remove 2 hex bolts, unclip pump, unclip motor mounts, remove old coupling & tap on new drive couplings & install rubber drive & reassemble
Story submitted on September 23, 2022
Part
Motor Coupling
Product Rating
Customer
Joel from VT
Problem
Washer would not spin or agitate
Tools
Socket set, mallet, pliers, phillips screwdriver, blocking to hold the washer at an angle
Repair & Advice
Online videos showed how to replace the part. This was essential for us. The failed part in our 22 year old washer did not look the same as the newer replacement parts. It fit fine though and the washer is repaired.
Story submitted on December 9, 2019