Freezer Door Gasket

Freezer Door Gasket

Ryan from WA

Freezer door gasket had torn at bootom right angle.... loss of cooling efficiency.

Electric drill, Phillips #2 Bit, magnet, & damp microfiber cloth

Expcept for 2 screws on each side (upper, lower, left & right) remove all the screws and place them on a magnet for easy keeping. Remove the old gasket (gently) and when you get to the screws left in place slightly loosen them to remove the pressure on the old gasket, then retighten; This allows the freezer door insert to stay centered and hang correctly while installing new gasket. Use the damp microfiber cloth and clean the freezer edges extremely well. Hang the new gasket and when installing at the points of the retained screws, simply loosen them and insert gasket rim behind the plastic shelving.