Part
Clock Control Board
Product Rating
Customer
Dan from MN
Problem
Both the upper and lower heating elements would not work. The stove top was fully functional and there were no error codes. Used a multimeter and ohmed out wires Bake and L2out, had resistance. Only thing was left was the control board.
Tools
Screwdriver with hex bit
Repair & Advice
Disconnect the stove power from the outlet. Remove upper rear panel (6 screws). Disconnected P5 from the main board. Disconnected wire from Bake, Broil, L1, L2in,l2out. Removed control board from housing (4 screws). Installed new board to frame Reconnected J5, Bake, Broil, L2in,L2out. Ran functional check (no issues).
Story submitted on December 18, 2014
Part
Clock Control Board
Product Rating
Customer
roxanne from MO
Problem
Main board on stove
Tools
Cordless screwdriver
Repair & Advice
Once part received, easy to put on. I ordered and paid almost $25 for next day ship. when I received someone had sent a microwave part vs stove part that I ordered. called and part was then sent next day. received Christmas eve. bottom line I paid $25 shipping so I could get my Christmas baking done in time and because of error in packing, tooks days from time of purchase. feel like I should have been refunded shipping due to their error. they do have great prices if it all works out
Story submitted on January 7, 2016
Part
Clock Control Board
Product Rating
Customer
Jason from NC
Problem
Oven not heating to temp and getting an F10 error
Tools
Screwdriver
Repair & Advice
Just replacing control board
Story submitted on February 24, 2019