Part
Ice Dispenser Solenoid
Product Rating
Customer
Kay from TX
Problem
Ice dispenser door would not open or close
Tools
Screw driver
Repair & Advice
Very easy repair. I removed the top portion of the dispenser by pushing the release just below the buttons...no need to remove the entire ice and water dispenser. Removed the 4 screws and pulled the three wires from the push button section. The solenoid was corroded and it was easy to see that it was creating the problem. I ordered the part and it arrived within 3 days. I also ordered the door release but did not need that part. I installed it in less that 10 minutes and it has been working great since. You can easily do this yourself...I am a female over age 60 and it was very easy and quick. There are also online videos available that provide step by step instruction.
Story submitted on January 19, 2016
Part
Ice Dispenser Solenoid
Product Rating
Customer
Joann from NJ
Problem
I've not dispensing
Tools
Screwdriver
Repair & Advice
Part was easy to replace
Story submitted on June 13, 2018
Part
Ice Dispenser Solenoid
Product Rating
Customer
Jerry from GA
Problem
Ice cube dispenser door would not open.
Tools
Screw driver
Repair & Advice
Old solenoid shorted and rusty.
Story submitted on October 22, 2018