Part
Surface Burner Base (17.5K)
Product Rating
Customer
Cruz from CA
Problem
Igniter rusted on to the burner. could not remove igniter without damaging the burner.
Tools
Pliers and screwdriver.
Repair & Advice
I had to soak the screwa holding the burner on the stove with WD-40 overnight to get screwa off as they were rusted on. Putting the new burners on was a piece of cake. I love working with my hands have all of my life. I've repaired all of my appliances in the past. Although a pain when something breaks down, it is always very pleasing bringing them back on line.
Story submitted on June 5, 2020
Part
Surface Burner Base (17.5K)
Product Rating
Customer
Bob from DE
Problem
Burner element would not ignite properly which lead to a safety issue.
Tools
Phillips head screw driver
Repair & Advice
The burner would not light properly and gas would build up. It looked like two of the raised points that hold the cover in place were bent. Took out 2 screws, removed element and disconnected igniter wire. Replaced with new unit and voila! Works perfectly.
Story submitted on January 14, 2020