Pump Harness

Pump Harness

george from OK

original wire bundle had corroded and broken at connectors

screwdriver

Install was very simple, just a bit cramped

Pump Harness

John from TX

Ice machine down.

Screw driver, 2 sockets (with extenders + 90 degree attachment) & fortitude + patience.

Ice machine (under counter) kitchen aid not working. Replaced recirc. pump, but still no ice. Further inspection revealed old wiring broken too (can't see this unless you take out harness holder). Was able to replace in hour or so because had already taken apart twice before - is a trash if you're old like me (68). Did it with ice machine in place as taking it out is an even bigger thrash. (Installation tech came 3 times when 1st purchased & never could stop it from leaking - got tired of calling him back, so did it myself - no leaks since-7 yrs). Be prepared; is very difficult to reach screws in back. Use magnetic socket if you have one & go ahead & take off door first (it'll be in the way).