Part
Infinite Switch
Product Rating
Customer
Ronnie from TX
Problem
Dual burner only worked on high
Tools
Philips screwdriver and 5/16 hex socket
Repair & Advice
Our stove top has a dual burner controlled by one switch. No matter which way you turned the switch, it was on high heat - no low, medium etc. Switch fixed the problem.
Story submitted on October 7, 2023
Part
Infinite Switch
Product Rating
Customer
William from MI
Problem
Smoke coming from the burner control switch.
Tools
Screwdriver, contact cleaner.
Repair & Advice
Stove was new in 2017, used only seasonally until 2021, then full time. After first 3 years the original switch stopped working, I ordered a replacement from another vendor. That switch worked fine until recently when I noticed small amount of smoke coming from the control panel of the stove. Upon opening the unit I discovered black burning of one connector on the part previously replaced. Cleaned the connector spade and used gold contact preserver when connecting new part.
Story submitted on April 23, 2024
Part
Infinite Switch
Product Rating
Customer
MICHAEL from TN
Problem
Bad switch.
Tools
Drill, screwdriver.
Repair & Advice
Replaced a bad switch. Make sure you always turn off the breaker before starting the process. Try taking pictures of the connection around the
Switch in case you forget where the terminals go. Be gentle and no rush.
Story submitted on July 9, 2021