Part
Surface Element Switch (12.0-15.3A)
Product Rating
Customer
David from TN
Problem
The stove eye would only run on high
Tools
Combination screwdriver and multimeter to test old switch
Repair & Advice
Take your time and pay attention to where everything goes. Especially the orientation of the switch.
Story submitted on January 19, 2019
Part
Surface Element Switch (12.0-15.3A)
Product Rating
Customer
Suzanne M. from DE
Problem
Heating element would change temperature settings on it's own.
Tools
Philips Screw drver
Repair & Advice
Shut the 220 volt power off at main disconnect.
Lifted the Whirlpool built in electric cooktop and turned it over on the granite counter on a towel.
Removed all of the necessary screws from all sides.
Removed the bottom cover.
Removed the metal cover from the center control box.
Removed the surface element switch and installed the new one.
Installed the center control box.
Installed the bottom cover.
Turned the cooktop over and set it back into the counter hole.
Turned power back on and tested the new element switch.
Everything worked out perfect. Great product.
Story submitted on December 10, 2021
Part
Surface Element Switch (12.0-15.3A)
Product Rating
Customer
Christopher from TX
Problem
element wouldnt regulate temp or turn off
Tools
screw driver
Repair & Advice
Element on stove wouldnt shut off replaced with control worked great
Story submitted on September 23, 2022
Chat with us
Open today 9am-6pm CT
Currently Viewing
0
