Control Panel (Black)

Control Panel (Black)

Bonnie from MA

Washer would not start

Screw driver

Carefully remove screws that hold front panel on washer, disconnect cable connections from front panel and remove front panel from washer. Reverse procedure to install new front panel.

Control Panel (Black)

John from CT

Some of the buttons were not working on the panel and some were but the dishwasher would not start. I went back and forth using various trouble-shooting techniques I found on this and other websites and had it down to either the control panel or the control board. I bought the panel not really knowing if it would fix the problem but it did! If your having similar trouble, this is likely your fix.

Torx screwdriver.

Shut off power to the dishwasher. Used a Torx bit to remove screws to free control panel and assembly. Removed plastic cover from control board to access and remove ribbon cable to remove and detach old control panel. Reattached ribbon cable from new panel, reattached the control board and replaced control board cover. Reattached assembled panel and control assembly to dishwasher with Torx screws. You have enough slack so that you do not have to remove the wires that go to the soap dispenser, just don't pull on them too much. I would like the give the panel 5 stars but they seem the major point of failure in these machines.

Control Panel (Black)

Omar from IL

Display panel lights were not working on dishwasher

Philips screw driver

Easy repair.Took 6 screws that hold display panel.Removed the door lock assembly and main control board.Transferred everything in to new panel.Tested all led lights works like new.Thanks parts Dr!