Part
Timer
Product Rating
Customer
Kevin from IL
Problem
Timer would not run.
Tools
Phillips screw driver, 1/4 in. Socket and ratchet, and small pliers.
Repair & Advice
Turn off power first, pull timer knob off of timer, remove rear cover from timer using 1/4 in. Socket, and pull cover off. Use a short 1/4 in. extension with your socket and ratchet. Remove three screws holding the timer to the front cover. Pull timer with the wiring out of the top cover. Put the wiring on the new timer tranfering one wire at a time to the corresponding spade on the new timer. Assembly is opposite of removal.
Story submitted on May 19, 2022