Part
Drum Baffle
Product Rating
Customer
Efrain from NY
Problem
The dryer burner with turn on and then it wouldn't
Tools
Screwdriver flat and stared, 9/32 socket and 5/16 socket drive.
Repair & Advice
In order to add the drum baffle you first have to remove the top two screws where the filter is located at. Then you have to open the top by prying it open with a flathead screwdriver. Then remove the front panel bye disconnecting the switch located on the top right-hand side. Once the panel is removed you're able to screw in the new baffle.
Story submitted on September 27, 2019
Part
Drum Baffle
Product Rating
Customer
Efrain from NY
Problem
Baffle broke off
Tools
Screwdriver
Repair & Advice
In order to add the drum baffle you first have to remove the top two screws where the filter is located at. Then you have to open the top by prying it open with a flathead screwdriver. Then remove the front panel bye disconnecting the switch located on the top right-hand side. Once the panel is removed you're able to screw in the new baffle. You will have to use the original screws that were on the baffle. But if you lost them or someone threw them out then your going to have to get some from your local hardware store because the new baffle doesn't come with them.
Story submitted on September 27, 2019