Part
Main Control Board
Product Rating
Customer
Jerry from FL
Problem
Ac unit would not hest.
Tools
Drill and needle nose pliers
Repair & Advice
Unplugged wires from old board. Unseated board. Clipped in New and rewired.
Story submitted on February 17, 2022
Part
Main Control Board
Product Rating
Customer
Charles from VA
Problem
Not heating.
Tools
Torx driver.
Repair & Advice
I seldom review products but I had to give a shout out to these guys for their fast shipping. It was almost as if they were next door and walked it over. I was in disbelief. Will definitely order from them again.
Story submitted on March 24, 2021
Part
Main Control Board
Product Rating
Customer
Charles from NC
Problem
The compressor was running continuously in both heating and cooling mode. It also continued to run when the temperature setpoint was reached and when the controller was set to OFF.
Tools
Phillips screwdriver, pliers, and 5/16 nut driver.
Repair & Advice
I noticed that the compressor never shut off no matter what the unit was set at. It even stayed running when the unit was switched OFF, so I had to unplug it when not in use. I suspect the compressor relay on the mainboard is fused closed. Parts Dr offered the same part that is available on GE's website, but for a much better price. The board arrived quickly and I had it swapped in less than an hour. The part fit multiple models, so an instruction sheet was included that described how to set the DIP switches. It was a straightforward repair and FAR less expensive than replacing the entire unit.
Story submitted on February 9, 2023