Part
Motor & Inverter Board
Product Rating
Customer
John from NY
Problem
Bad motor/9 blink code.
Tools
1/4 inch socket set.
Repair & Advice
Nine blinks on old motor/replace. Purchased new motor and belt. Used belt tool for new belt (used one cable tie).
Story submitted on June 25, 2020
Part
Motor & Inverter Board
Product Rating
Customer
Michael from CA
Problem
After determining the failed part was the motor(schematics help), I ordered direct from here. GE wanted to charge and arm, leg and first born...
Tools
Zip tie, screwdriver and wrachet set. Oh and an ohm meter.
Repair & Advice
Well, for sure do a lot of checking on videos on-line, bound to be someone that details the problem with you washer, dryer, etc. I did just that, found someone that worked on my my machine, detailed the testing and what to ohm out with an ohm meter, Once I had that and the schematics. I determined if was a failed motor and not the magnetic switch or the timing unit on the back panel(two of which a repairman was blindly ordering because he did not know what was wrong with it).
Story submitted on June 18, 2015
Part
Motor & Inverter Board
Product Rating
Customer
John from CT
Problem
Motor replacement
Tools
Socket wrench, screw driver, plastic tie.
Repair & Advice
Replacement successful, used step by step video online! Inserting belt was the hardest.
Story submitted on September 17, 2016