Part
Water Inlet Valve
Product Rating
Customer
RALPH from MS
Problem
Cold water would not shut off completely
Tools
Nutdriver and pliers used.
Repair & Advice
Turned water off, unscrewed water hoses from washing machine. removed back from top of washer. Unplugged inlets. Unscrewed water inlet. replaced with new part. Plugged back in and put all back together and problem solved
Story submitted on March 20, 2018
Part
Water Inlet Valve
Product Rating
Customer
Tyron from VA
Problem
Washer tub was filling very slowly with water.
Tools
Pliers with a ratchet and socket
Repair & Advice
First I turned off all water and electricity to the unit. Disconnected the hot and cold water lines. Then I removed the three hex head screws from the back of the top cover. Unplugged the hot and cold inlet electrical fittings. Slid the little clamp holding the hose on the inlet valve next slid the pipe off. Finally I put the new part on in reverse order.
Story submitted on November 15, 2019
Part
Water Inlet Valve
Product Rating
Customer
Todd from ND
Problem
Washer filled real slow.
Tools
Philips screwdriver, quarter inch socket, pliers
Repair & Advice
Ordered water inlet valve,received in 5 days you tubed it and away we go.
Story submitted on July 13, 2021
Chat with us
Open tomorrow 9am-6pm CT
0
