Door Handle (Stainless)

Door Handle (Stainless)

Stacy from KS

Broken handle on microwave.

Screw driver, putty knife.

Found a video on YouTube that showed how to pop off the microwave door's an inside panel and replace it with the new handle. Very easy.

Door Handle (Stainless)

Robert from NJ

Broken handle.

Putty knife, #2 phillips screwdriver.

Use the putty knife to separate the inner door liner from the door frame and expose the mounting hardware for the handle. Two phillips screws secure the handle. You have to reuse those screws for the new handle, as new hardware is not included with the replacement. Don’t damage or lose them. (Use a quality undamaged screwdriver.) Start each screw and then align the handle before you tighten both. Work carefully, as you are cutting new threads in the handle with those screws. Snap the liner back in place. Done. Take your time. This is an expensive yet fragile part.

Door Handle (Stainless)

Sharlene from NJ

Bottom of handle broke

screw driver

I would have liked new screws to be included