Part
Control Board
Product Rating
Customer
Shane from NV
Problem
Error code signified that the controller board was faulty.
Tools
Phillips screw driver
Repair & Advice
This was an easy fix. Remember to turn the breaker off before installing. Wires are all color coordinated and the controller has the colors written into the plastic casing so it’s almost impossible to screw up. Take a picture of the old one while it’s still connected just in case so you know which wires go where.
Story submitted on June 26, 2021
Part
Control Board
Product Rating
Customer
john from TX
Problem
After finishing about half of the wash cycle it would just stop. Like it was waiting for some timer to finish. If you restarted the wash it would stop in the same place every time.
Tools
Nut driver / screwdriver
Repair & Advice
Watch the video / take your time
Story submitted on October 1, 2022
Part
Control Board
Product Rating
Customer
David from VT
Problem
Washer had multiple codes, would not fill.
Tools
Torx bits, screwdriver
Repair & Advice
Very impressed with turnaround and shipping from Parts Dr but unfortunately my washer is still broken. Unit is a 5 year old Whirlpool. Very unimpressed with modern Whirlpool appliances in general. Very poor longevity. Still looking for more parts to throw in this one to avoid buying whole new unit.
Story submitted on April 5, 2022