Water Filter & Head Assembly

Water Filter & Head Assembly

Chester from VA

Low flow from door water dispenser and slow ice making.

Flat and philips screw drivers.

- I found and followed a Youtube video. - - The difference was I had cut off the brass fitting on the end of the tube. - My connection was a push type fitting. - I spent half the time cleaning out the fridge and removing shelves and covers, before I could replace the water "tank" coil of tubing. - I think the root cause is in the plastic filter head wearing out over 5 years of use, and not allowing water to flow through the filter. - I concluded that this was the problem by removing the filter and installing the bypass plug. This restored full flow. So I decided to purchase a new filter head assembly. - if it were available, I could have just replaced the filter head and not the entire "tank" tubing.

Water Filter & Head Assembly

Don from OH

Water filter leak

Pliers, wrench, socket,

Replaced filter assy

Water Filter & Head Assembly

Gary from PA

Leak from water filter head

Screwdriver,2,1/2 wrenches,1/4 nut driver is all that was needed

Was a little nervous but after watching a YouTube video repairs were completed very easily