Control Board/Display

Control Board/Display

Julio from OR

Cooktop (induction) would randomly turn off and start beeping. Could only resolve by flipping breaker. Was happening 1-2 times per day.

phillips screwdriver

Quite easy to repair. Stove does need to be pulled 8" away from wall to get clearance to reach back screws. There are youtube videos that show how to remove the top glass, if you can't figure it out. Watch out for one of the screws in the front of the right hand side, as it's very easy to drop it down a sheet metal channel when unscrewing it. I had to find a replacement from my stash of screws. The panel is easy to pull out. Just be careful to use the tabs on the wiring blocks to ensure that you don't damage them when disconnecting the wires.

Control Board/Display

Lena C from NY

Induction cook top controls would not work

Philips screw driver

The main difficulty is to access the area. To know which parts to remove, I was helped by a couple of youtube videos. I could not find a video for my exact model, but close enough. I needed to slide out the range and that is a two person job. Also useful to have a person help lift off the glass top. A small, non essential part was broken in the shipped part, but I could sub in from the part I was replacing. Better wrapping would have avoided that. Otherwise, seems to work as advertised. I had never done anything like it so I would say it was easy.