Part
Insulation
Product Rating
Customer
Timothy from ME
Problem
Soap scum under the float caused a leak, soaking and ruining this insulation
Tools
Flathead screw driver
Repair & Advice
I removed the front cover to see where the leak was coming from. Then I removed the float, cleaned up around it, reinstalled, and tested. The insulation was ruined, so I had to replace that part.
Story submitted on January 10, 2020
Part
Insulation
Product Rating
Customer
Paul from AZ
Problem
Leak from under dishwasher, insulation was moldy.
Tools
Screwdriver.
Repair & Advice
Discovered our dishwasher was leaking. Leak was coming from the overflow float (ufo looking thing at front right of dishwasher). Cleaned and tightened overflow assembly. Replaced the insulation because it was terribly moldy.
Story submitted on February 5, 2021
Part
Insulation
Product Rating
Customer
Justin from CA
Problem
There was a leak from my washer, causing the insulation to be soaked with soapy water. I could have dried the insulation and reinstall it, but I figured it's time for a replacement, after all it's been in service for the past 10 years. After checking the prices with PartsDr and felt it was a reasonable price and place the order.
Tools
Flat heat screw driver.
Repair & Advice
The product is OEM so fits like as it should. Remove the old stuff by quarter turn on both sides to take the plastic anchor off. Pull everything forward. Put the new ones in.
Story submitted on February 9, 2023
Chat with us
Open today 9am-6pm CT
0
