Dispenser Housing

Dispenser Housing

Andrew from TX

Water leaking from original dispenser housing.

1/4 ratchet.

I would recommend watching a youtube video of how to take the top of the washer off. Its all 1/4 inch screws to undo. There are 2 screws from the top that hold the housing in place and 2 on the underside. Removing the old one and replacing the new one is fairly simple. Having a second person hold the top of the washer that you have unscrewed is helpful, but not necessary. Be sure not to overtighten the screws when you install because you are using metal screws on plastic parts and you can strip the housing. The only other thing to do is reconnect to the electrical board which is just plugging it in.

Dispenser Housing

Alan from TX

The dispenser was leaking.

Screwdriver and socket set

The washer was leaking into the base and keeping the clothes wet. It was also leaking out the bottom of the machine, onto the floor, when hot water was used. The part fixed both issues.