Part
Cold Water Inlet Valve
Product Rating
Customer
Sherry from TN
Problem
Machine continued to fill with water.
Tools
Socket wrench.
Repair & Advice
Water continued to run, ran test and showed water inlet valve should be the problem. Replaced both hot and cold and machine is doing great.
Story submitted on May 11, 2021
Part
Cold Water Inlet Valve
Product Rating
Customer
Jamie from TX
Problem
Washer would not stop filling with water, even when unplugged.
Tools
Screw driver, nut driver
Repair & Advice
Easy repair to make and it fixed the problem. We replaced the hot and cold at the same time just so we wouldn’t have to repeat the process in the near future.
Story submitted on July 29, 2018
Part
Cold Water Inlet Valve
Product Rating
Customer
Thomas from NC
Problem
The cold water valve leaked (dripping) when the wash cycle finished.
Tools
Screwdriver, pliers.
Repair & Advice
This was so easy. Two screws hold the valve in place, reattach the supply and delivery hoses. It works perfectly and we don't have to rush to the washer at the cycle end to manually turn off the supply line.
Story submitted on June 10, 2021