Part
Suspension Rod Kit
Product Rating
Customer
Robert from TX
Problem
Constantly stopping during the spin cycle with off balance error, even with lighter loads
Tools
Crescent Wrench & Gloves
Repair & Advice
The tub gets heavy once you get a couple rods released, 1 person is doable but would have been easier with 2. I taped the lid down so it would not fly open once the top was released and placed in a open position. Have a towel or 2 handy for when you have to lay the unit down to work the old rods out
Story submitted on July 6, 2023
Part
Suspension Rod Kit
Product Rating
Customer
Bruce from PA
Problem
Suspension cups broken
Tools
1/4” socket wrench, screwdriver
Repair & Advice
Replaced suspension rods
Story submitted on June 13, 2019
Part
Suspension Rod Kit
Product Rating
Customer
Dexter CMB1108 from FL
Problem
Unstable washer drum
Tools
Screwdriver to accommodate the screws
Repair & Advice
I removed the top cover to get access to the suspension robs where they were unclipped. The machine was placed to lay flat on the floor where l remove the old suspension robs and replace them with new ones. The machine was later placed to stand where a second person assisted me in reconnecting the robs to its appropriate areas. Make sure and have someone to assist you.
Story submitted on June 20, 2021
Chat with us
Open today 9am-6pm CT
0
Currently Viewing
